Cheap Lighting Upgrade for Bambu Lab A1: See Your Prints Clearly
If you own a Bambu Lab A1 or A1 Mini, you’ve probably noticed that the built-in lighting isn’t exactly spectacular. While these printers are excellent machines, trying to monitor your prints through the side panels or camera feed can be challenging when you can’t see…
The Complete Guide to DIY Filament Dry Storage
If you’ve ever experienced mysterious stringing, popping sounds during printing, or parts that snap way too easily, there’s a good chance moisture is the culprit. Filament absorbs water from the air, and wet filament causes problems that are frustrating to diagnose…
The Secret to Perfect First Layers Every Time
If your prints aren’t sticking to the bed—or worse, sticking too well in some spots and not at all in others—there’s a good chance your bed just needs a proper cleaning. Oils from your fingers, dust, and residue from previous prints build up faster than you’d think….
10 Ways a Heat Gun Will Level Up Your 3D Printing Game
When I first got into 3D printing, I thought I needed more printer upgrades to get better results. Better hotend, better bed, better filament. What I didn’t expect was that one of my most-used tools would be something that doesn’t touch the printer at all—a heat gun….
The $10 Tool That Makes Every 3D Print Look Professional
You know that moment when you pop a print off the bed and it’s almost perfect? The model looks great, the details are crisp, but there’s that ugly brim residue, a few strings, and sharp edges where supports used to be. You could sand it. You could pick at it with your…
The Tiny Power Tool That Made 3D Printer Maintenance Actually Enjoyable
I’ll be honest—I used to dread printer maintenance. Swapping nozzles, tightening loose belts, adjusting eccentric nuts, assembling multi-part prints with heat-set inserts… it all meant digging through a drawer of mismatched screwdrivers and hex keys, inevitably…
Why Digital Calipers Are the Most Important Tool on My 3D Printing Desk
Ask any experienced 3D printing enthusiast what tool they reach for most often, and I guarantee calipers will be near the top of the list. Not a fancy nozzle. Not specialty filament. A simple measuring tool that costs less than a spool of PLA. I put off buying a good…
How I Finally Solved My 3D Print Bonding Problem (And You Can Too)
If you’ve ever tried to glue two 3D printed parts together, you know the struggle. You apply the glue, hold the pieces in place for what feels like an eternity, and then watch in frustration as they slowly slide apart or take forever to cure. I’ve been there more…
Essential Tools and Accessories for 3D Printing Success
Whether you’re just getting started with 3D printing or looking to upgrade your setup, having the right tools and accessories can make all the difference. Here are my top recommendations for must-have items that will improve your printing experience and help you…